Sign In | Join Free | My futurenowinc.com
China ZHEJIANG SINGI ELECTRICAL LLC logo
ZHEJIANG SINGI ELECTRICAL LLC
ZHEJIANG SINGI ELECTRICAL LLC We think what you thought
Active Member

9 Years

Home > Surge Protector Device >

10 - 20KA Double phase surge protection device for installation in distribution boards

ZHEJIANG SINGI ELECTRICAL LLC

10 - 20KA Double phase surge protection device for installation in distribution boards

Brand Name : Singi

Model Number : SPD

Certification : CE/CB/ISO9001/CCC

Place of Origin : Zhejiang, China

MOQ : 500pcs

Price : Negotiation

Payment Terms : T/T,L/C,Western union

Supply Ability : 600000 pcs per month

Delivery Time : normally 15 days after deposit

Packaging Details : Standard neutral carton

Poles Number : 1P,2P,3P,4P

COLOR : RED,YELLOW,WHITE

Type : SURGE PROTECTIVE DEVICE

Imax : 100KA

Function : lightning protection

Contact Now

10 - 20KA Double phase surge protection device for installation in distribution boards

Product Description

Surge Protection for Solar Photovoltaic (PV) System
The OBV6 series Surge Protection are designed to protect against lightning surge voltages in photovoltaic power supply networks. These units must be installed in parallel on the DC networks to be protected and provide common and differential modes protection. The OBV6-B+C40 series is available for the main operating voltages in photovoltaic: 1000 Vdc.
The use of OBV6-B+C40 series Surge Protection is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. The electrical diagram of the OBV6-B+C40 series is based on high energy MOVs equipped with specific thermal disconnectors and related failure indicators. The OBV6B+C40 series is made with plug-in modules to allow a fast and easy maintenance in case of failure (disconnection from the DC network).
em DC SURGE PROTECTIVE DEVICE
Code FSP-D40
Pole 2P 3P
Voltage 500VDC,600VDC 800VDC,900VDC,1000VDC
In(8/20)us(KA) 20KA
Imax(8/20)us(KA) 40KA
Standard IEC/EN61643
Type II
Characteristic Curve B,C,D
Working Temperature “-5°”to +40°
Protection Degree IP20
Electrical life More than 8000times
Mechanical life More than 2000times
Dimension(W)X(H)X(D) 36x90x68 54x90x68
Installation 35MM DIN RAIL
Accessory Remote signal
Installation Altitude ≤2000M
10 - 20KA Double phase surge protection device for installation in distribution boards

Installation instructions

1. You must cut off the power supply before installation, live line work is strictly prohibited.

2. In protecting front line fuse or automatic circuit breaker.

3. Protector for the parallel installation, Kevin connection is recommended (for Kevin wiring convenience, operates two terminals on the module, which is a straight up. Kevin v-like connection is a connection. A contact point and the two lines in parallel, one into, a calculated). Connector requires solid and reliable, and short, thick and straight.

4. Protector in use during the fault display window should periodically verify and view state when red fault display window or remote Terminal outputs alarm signals, the protector fails, should be repaired or replaced in a timely manner.

5. When installed according to the installation diagram shows the connection, where l (L1, L2, L3) for the line, n is neutral, PE ground wire, do not mistake. After the installation is complete, check that the protection unit is plug in place, close the automatic circuit breaker (fuse) switch, check the working status is normal.

10 - 20KA Double phase surge protection device for installation in distribution boards


Product Tags:

electrical surge protector

      

surge protective device

      
Wholesale 10 - 20KA Double phase surge protection device for installation in distribution boards from china suppliers

10 - 20KA Double phase surge protection device for installation in distribution boards Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: ZHEJIANG SINGI ELECTRICAL LLC
*Subject:
*Message:
Characters Remaining: (0/3000)